| | | | | | | | | |

CARE AND CLEANING

Water Cooler Sanitising Agent

Quick Easy Four Step Cooler Santising Agent NOW AVAILABLE!

3 x 20g Sachets per pack.

Use 1 Sachet every 4 months.
Simple to use

Can be used on all floor standing or desktop water dispensers.

	Step 1: Remove bottle from dispenser. Fill bottle ¼ full of water & add sanitiser agent. Mix well.
	Step 2: Switch off the water dispenser & remove drain plug from wall socket. Drain the remaining water out of the dispenser.
	Step 3: Put the bottle containing the sanitising solution back onto the dispenser. Turn taps until water runs out of them. Ensure the tank is full of solution and stand for 5-10 minutes. Drain the solution from the dispenser.
	Step 4: Remove bottle, rinse & fill with clean water. Return bottle to dispenser. Turn taps on until water runs out of them. Let clean water stand in tank for 1 minute then drain water dispenser. Water dispenser can now resume normal function.

Please contact aquaport@aquaport.com.au to purchase your sanitising pack.

Manufacturer Recommendations

Wash the UNIVERSAL bottle caps after each use.
They are dishwasher safe.

Rinse out tank after using flavored beverages:

Step 1:
Fill an empty one liter bottle 3/4 full with warm water. Pour water into unit.

Step 2:
Empty tank by unscrewing the cap at the back of the unit.

Step 3:
Make sure to drain over a sink, water will immediately come out upon unscrewing the cap.

Step 4:
Rinse the tank several times to remove all taste.

Note: Drain liquids by unscrewing the cap on the bottom rear of any of the Aquaport Units.