Sediment Replacement Filter M Series

AQP-RFMS

Simple 1/4 turn to release and replace, it is as simple as changing a light bulb!

  • 5 Micron (nominal) Sediment Filter
  • Removes suspended particles in the water e.g. dust, rust, silt, scale & sediment.
  • Cartridge Life : 12 Months or 6500 Litres
  • This Sediment replacement filter is for use in the M series Twin Stage AQP-FKM2 and Triple Stage AQP-FKM3 Filtration Systems only

Cartridges to be replaced every 12 months or 6500 litres of filtered water to perform as stated. Depending on your water quality replacement may be required sooner

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system

For cold water use only

MODEL: AQP-RFMS

NAME: Sediment Replacement Filter

FLOW RATE: Up to 3L/pm

WORKING PRESSURE: 30-125 psi

TEMPERATURE: 1 - 38C

SERVICE LIFE: 12 months or 6500L

GROSS WEIGHT: 65g

MADE IN KOREA

INSTALLATION INSTRUCTIONS:

1. Turn water supply off

2. Turn filter tap on to release any excess water still present in the system and to ensure the water supply is off

3. Remove exhausted filter cartridge by turning cartridge 1/4 turn to the left and then pull down

4. Remove new filter cartridge from packaging

5. Insert new filter cartridge into the filter head and turn cartridge to the right a 1/4 turn

6. Slowly turn water supply on

7. Leave filter tap in the 'on' position for 2 minutes to allow water to fully flow through the cartridge

NOTE: Water may appear milky as small air bubbles are expelled from the new cartridge, this is normal.

See the manual for your M series water filtration system for further info on cartridge replacement

© COPYRIGHT 2017 AQUAPORT